how to flash nokia android phone

How to flash Nokia Android Phone

Commonly three type flashing method is available in Nokia phone; default update method, recovery mode method, flash tool method, flashing by box / dongle online and offline method

Flashing Nokia with Recovery Mode

This method you don’t need any flash tool, Computer or any other USB drivers to flash the firmware of Nokia. You need just a flash file only. This method deletes all your device data. So backup all data like photos, contacts .. etc before flashing your phone.

1. Download the Firmware and move it to SD Card storage.
2. Then remove the SD card.
3. Power off your Nokia device
4. Connect USB / charger cable into your Mobile.
5. Hold down the Volume Up + Power Button.
6. Release all buttons when you see Android One logo.
7. Navigate with volume Buttons to select wipe data/factory reset option and Press the Power Button, select option YES and press Power button to confirm.
8. After wiping completed, insert SD card.
9. Now again go to recovery mode and Choose option "Apply update from SD".
10. In this step, Locate Downloaded Firmware file from SD Storage.
11. Tap on the Firmware file and install it.
12. You have successfully updated your phone Firmware and reboot

Flashing Nokia with Flash Tool

You need Computer, flash tool, flash file, USB drivers, and USB cable to flash with this method. All data will be deleted after flashing, so backup all personal data like photos and contacts... etc to prevent data loss. Follow these steps to flash your Nokia Android phone with flash tool.

1. Download the Nokia flash file, flash tool, and USB drivers on your PC.
2. Install the USB drivers for your Android phone.
3. Run Flash tool on your computer.
4. Switch off your Nokia mobile.
5. Hold Volume Up + Power Button / Volume Down + Power Button
6. Connect your Nokia phone to the computer with a USB cable.
7. Browse the flash file in the flash tool and click on the download button.
8. Now flashing start on your phone.
9. Flashing takes 10 to 15 minutes. Please wait until flashing is completed.
10. After flashing completed, Your device automatically rebooted.